Ready for the next run.
A calm after-ski routine begins with the boot and liner instructions, then moves to a setup that fits the exact gear in front of you.
Start with the care routeLicensed ski-scene photograph. Pictured footwear is illustrative; SOTHING products appear in the product sections below.
The short answer
Check the liner first. If heated drying is permitted, choose the attachment that reaches the boot without blocking airflow.
The Ultra Ski Kit is the closest current catalog match because the approved kit reference lists extendable ski-boot tubes and multi-vent drying supports. That does not make it suitable for every liner: heat-moldable and heat-sensitive liners still follow their own manufacturer guidance.
A route from wet gear to the next use.
Treat the shell, liner and insole as separate care decisions. A timer sets a session; it does not prove compatibility or guarantee a dry result.
01 / Compatibility Read the boot, liner and insole separately.
Look for heat limits or a no-heat instruction on each removable part. Do not use a lower dryer setting to override a manufacturer prohibition.
02 / Preparation Open the boot and create a clear air path.
Release closures and remove the liner or insole only where the footwear instructions permit it. Keep every outlet clear rather than forcing an attachment into a tight opening.
03 / Air path Match the attachment to the permitted item.
The Ski Kit reference distinguishes extendable boot tubes from shorter multi-vent supports. Attach or remove them only as shown in the supplied instructions, with the unit switched off.
04 / Cool down Check progress, then cool before packing.
Moisture level, construction and room conditions affect the result. Switch off, unplug and let the unit cool before returning it to the storage bag.
Recommended starting point
Ultra Ski Kit
The approved US kit reference shows one Ultra main unit, two extendable ski-boot tubes, two multi-vent drying supports, a storage bag and instructions. It is the only current Ultra variant whose supplied packing reference is explicitly organized around ski boots and compatible winter gear.
Use only the attachment and setting permitted by the footwear and product instructions. Regional electrical mapping remains a release gate.
Online ordering is not open in this region yet.
Explore the modelPrice and availability above come from the live Shopify product and selected Ski Kit variant. The packing description comes from the approved US Ski Kit source artwork already used in the product template.
Compare the practical fit.
Prices and availability are read from Shopify. Product suitability still depends on the exact footwear, liner and regional unit.
Ultra Ski Kit
The kit-specific starting point: extendable boot tubes plus multi-vent supports in the approved US packing reference.
Ultra Grey
Single-unit Ultra edition with two attached extendable ducts; it does not include the Ski Kit attachment set.
Lang
Retractable-hose boot dryer documented for taller footwear, but the Store launch state and regional electrical details are not yet approved.